1.中化建国际招标有限责任公司（以下简称：招标代理机构）受中海石油（中国）有限公司（以下简称：招标人）委托，现邀请投标人对下列货物和服务提交密封投标：
资金到位或资金来源落实情况：已落实
项目已具备招标条件的说明：已具备
是否接受联合体投标：不接受
项目概况：流花11-1/4-1油田二次开发项目包含新建一座4腿导管架平台和一艘多点系泊的圆筒型FPSO，坐落于南海东部珠江口盆地水深约300米的海域。本采办包主要内容为系泊系统的聚酯缆、浮筒、连接件。

货物名称：聚酯缆、浮筒、连接件

数量：
聚酯缆9套；
集成式浮筒12套；
连接件101套。

主要技术参数：
聚酯缆破断荷载22600kN，长度1343m+686m（工厂试验后，确认最终长度（1% MBS 荷载下的长度））；
连接件破断荷载24281kN（新连接件）。

★交货计划：
国内交货要求：
1)聚酯缆要求在合同签订后10.5个月交货到深圳指定地点。
2)集成式浮筒应交货到深圳指定地点：
第一批，合同签订后8个月交货。
第二批，合同签订后10.5个月交货。
3)连接件应交货到深圳指定地点：
第一批，合同签订后5.5个月交货。
第二批，合同签订后8个月交货。
第三批，合同签订后10.5个月交货。

国外交货要求：
1)聚酯缆要求在合同签订后10.5个月交货到深圳蛇口码头（DAP深圳蛇口码头）。(INCOTERMS 2020)
2)集成式浮筒，交货到深圳蛇口码头（DAP深圳蛇口码头）。
第一批，合同签订后8个月交货。
第二批，合同签订后10.5个月交货。
(INCOTERMS 2020)
3)连接件，交货到深圳蛇口码头（DAP深圳蛇口码头）。
第一批，合同签订后5.5个月交货。
第二批，合同签订后8个月交货。
第三批，合同签订后10.5个月交货。
(INCOTERMS 2020)

货物批次划分具体见附件D价格表。

任何批次的货物（集成式浮筒的第一批次除外）交货日期最多可推迟4周，交货期偏离超过基础时间4周，则视为非响应性投标而予以否决。

集成式浮筒的第一批次交货时间最迟不晚于集成式浮筒的第二批次要求交货时间。

2.资格和业绩要求：
(1) 资格要求
★ 资格要求1：投标人必须是聚酯缆制造商；不接受OEM；
投标人应是聚酯缆的制造商（包含同一集团公司下的负责产品销售的公司。如果投标人负责所在集团公司的销售，应提供官方声明和证明材料，证明材料应能够证明投标人与制造商属于同一个集团公司，投标人负责投标产品的销售。），不接受OEM。
投标人如为集团公司下的负责产品销售的公司，所提供的业绩产品的生产工厂必须与计划为本项目提供产品的生产的工厂一致。


★ 资格要求2：投标人必须通过ISO9001认证并提供证书复印件。

★联合体：本次招标不允许联合体投标。

★设备证书：投标人应承诺该产品：聚酯缆、浮筒、连接件取得DNV船级社的入级产品证书，并随设备一同交付。

(2) ★业绩要求：
投标人的聚酯缆工厂自2007年1月1日至投标截止日（以合同签订日为准）至少为2个项目的浮式生产设施永久系泊系统提供过整套的系泊系统的聚酯缆业绩；并均已在役满一年。
投标人选择的集成式浮筒工厂自2007年1月1日至投标截止日（以合同签订日为准）至少为2个项目的浮式生产设施永久系泊系统提供过整套的系泊系统的集成式浮筒业绩；并均已在役满一年。
投标人选择的连接件工厂自2007年1月1日至投标截止日（以合同签订日为准）至少为2个项目的浮式生产设施永久系泊系统提供过整套的系泊系统的连接件业绩；并均已在役满一年。
投标人所提交的业绩证明文件必须至少体现以下内容：项目及用户、货物名称、供货数量、使用环境（应用于海上浮式生产设施），设备在役时间（以锚腿海上回接或设施首油时间为在役开始时间）等要求。

投标人须提交业绩表（详见附件E)，并提交相关业绩证明文件。业绩证明文件包括但不限于：
1）合同或采购订单的复印件（仅首页，签字页，供货范围）；
2）总体布置图（浮筒提供总体布置图，证明为集成式浮筒；其他产品可不提供）；
3）产品船级社证书；
4）设备在役时间证明文件。

在役业绩为截止投标日最少在役1年以上，证明文件可以是以下其中之一：
1）业主/买方发出的设备投入运行的信函
2）在业界权威机构OFFSHORE MAGZINE发布的全球浮式设施统计表或OTC发布的技术论文里面体现所投业绩设施首油时间或系泊锚腿海上连接时间的文件;
3）证明设备投入运行的业主或买方官方网页.

浮式生产设施类型应在上述证明文件中标注出来。

3. 有兴趣的合格投标人可通过以下方式获取招标文件：
从2022年9月30日开始至2022年10月12日止，在中国海油采办业务管理与交易系统（https://buy.cnooc.com.cn/cbjyweb/）购买招标文件（电子版）。投标人须在线填写购买招标文件登记表，并在线支付标书款至指定账户。在线支付成功后，投标人可自行下载招标文件。招标文件每套售价为200元人民币或30美元（收款人：中化建国际招标有限责任公司，收款行名称：INDUSTRIAL AND COMMERCIAL BANK OF CHINA,Beijing National Cultural and Financial Cooperation Demonstration Zone Jinjie Sub-branch，收款人账号：0200000709117000351，收款行SWIFT CODE: ICBKCNBJBJM，收款行地址：No. 237 Wang fu jing Street, Dongcheng District, Beijing, ChinaPR: 100006。），售后不退。未在本系统领购招标文件，不得参加投标。

4. 投标文件递交截止时间和地点：所有投标文件都应附有按规定提交的投标保证金，并于2022年10月24日9:00时（北京时间）前递交至北京市东城区东直门外小街6号海油大厦4层第八会议室。

5.开标时间：定于2022年10月24日9:00时（北京时间）开标。届时请参加投标的代表出席开标仪式。
开标地点：北京市东城区东直门外小街6号海油大厦3层308室。

6. 本次招标公告同时在机电产品招标投标电子交易平台（www.chinabidding.com）上发布。

7.投标人在投标前需在机电产品招标投标电子交易平台上完成注册。评标结果将在机电产品招标投标电子交易平台公示。

招标人：中海石油（中国）有限公司
详细地址：广东省深圳市南山区后海滨路3168号海洋石油大厦A座32层
联 系 人：左媛媛
电话：+86-755-26022447
电子信箱：zuoyy@cnooc.com.cn

招标代理机构：中化建国际招标有限责任公司
地址：北京市东城区东直门外小街6号海油大厦4层
邮编：100027
联系人：陈偲聪
联系电话：+86-10-84525975
电子邮箱：chensc2@cnooc.com.cn


1.CNCCC InternationalTendering Co., Ltd. (hereinafter called “Tendering Agent”), for and on behalfof CNOOC China Limited (hereinafter called "Purchaser") invitessealed bids from eligible bidders for the supply of following equipment:
Source of Funds: yes
Description of The Prepared Bidding Conditions: yes
Joint Bids: NOT Acceptable

Project overview: Liuhua11-1/4-1 oilfields continued development project will include one 8 legs fixed jacket platform and one new built FPSO, which are located in the Pearl River Mouth Basin, South East. China Sea. The FPSO is cylinder type and multi-point moored that the water depth is about 300m. The main content of this procurement package is to purchase FPSO Polyester Rope/ Integrated Buoyancy Element and Connection Accessories.

Name of Goods: FPSO Polyester Rope/ Integrated Buoyancy Element and Connection Accessories

Quantity:
Polyester Rope： 9 Sets ；
Integrated Buoyancy Element ：12 Sets；
Connection Accessories ：101 Sets.

Main Technical Data：
Polyester Rope ： 22600 kN MBS 1343m+686m(Manufactured Length at 1%MBS，to be confirmed after test)；
Connection Accessories ：24281 kN (New) MBS

★Delivery Schedule:
From within PRC ：
1)Polyesters Rope, Should arrived at Shenzhen designated location within 10.5 months after Award of Contract.
2)Integrated Buoyancy Element,Should arrived at Shenzhen designated location.
1st batch within 8 months after Award of Contract.
2nd batch within 10.5 months after Award of Contract.
3)Connection Accessories arrived at Shenzhen designated location.
1st batch within 5.5 months after Award of Contract.
2nd batch within 8 months after Award of Contract.
3rd batch within 10.5 months after Award of Contract.

From outside PRC：
1）Polyesters Rope,Should DAP Shekou Port, Shenzhen , Guangdong Province, P. R. of China within 10.5months after Award of Contract.
(INCOTERMS 2020)
2）Integrated Buoyancy Element, Should DAP Shekou Port, Shenzhen, Guangdong Province, P. R. of China
1st batch within 8 months after Award of Contract.
2nd batch within 10.5 months after Award of Contract.
(INCOTERMS 2020)
3）Connection Accessories,Should DAP Shekou Port, Shenzhen, Guangdong Province, P. R. of China
1st batch within 5.5 months after Award of Contract.
2nd batch within 8 months after Award of Contract.
3rd batch within 10.5 months after Award of Contract.
(INCOTERMS 2020)

Cargoes batch details can be found in Appendix D.

All cargoes DAP date postponed within 4 weeks is acceptable. The response form will be considered as non-material response to the tender documents and rejected if the delivery date is 4 weeks later than the basic time.
The 1st batch of Integrated Buoyancy Element is excepted, shall be delivered no later than the second batch of integrated buoy.


2.Requirements for Qualification and reference of Bidder:

(1) Requirements for Qualification of Bidder:
★ Qualification requirement 1:Bidder must be Polyester Rope manufacturer, OEM not accepted.
The bidder shall be the manufacture of Polyester Rope( including the bidder is responsible for sales within the group corporation. If the bidder is responsible for sales within the group corporation, it should provide the statement and official document that the Bidder and the manufacture belong to the same group corporation and the Bidder is responsible for the sale of Polyester Rope.),OEM not accepted.
If the bidder is responsible for sales within the group corporation, the production manufactory of the submitted performance must be the same one which is planned to produce the production for this project.

★Qualification requirement 2：The bidder must provide Copies of bidder’s ISO9001 certificate.

★Joint Venture：Joint Venture is not accepted.

★Equipment certificates：Polyester/Buoy and Connectors shall be classified by the Authorized Certifying Agencies DNV, and obtained Certificate of Compliance from DNV , the Certificate of Compliance shall be issued with the cargo delivered.



(2) ★Requirement for Bidder's reference:
The Bidder's Polyester Rope manufactory shall have supplied 2 projects with complete set Polyester Ropes for floating production facility long term permanent mooring system from 1st of Jan,2007 to bidding date(date of contract). And the reference in serviced at least one year till to bidding date.

The Bidder selected Integrated Buoyancy Element manufactory shall have supplied 2 projects with complete set Integrated Buoyancy Elements for floating production facility long term permanent mooring system from 1st of Jan,2007 to bidding date(date of contract). And the reference in serviced at least one year till to bidding date.

The Bidder selected Connection Accessories manufactory shall have supplied 2 projects with complete set Connection Accessories for floating production facility long term permanent mooring system from 1st of Jan,2007 to bidding date(date of contract). And the reference in serviced at least one year till to bidding date.

The corresponding documentary evidence submitted by the Bidder shall at least demonstrate the content showed as follows: project name, end user’s name, equipment package name, quantity, usage circumstance (offshore floating production facilities), in-service time ( The date of mooring leg hooked up or facility first oil is taken as the date of in-service start ) .

The Bidder shall provide Format of Performance Table(refer to attachment: Appendix E) and corresponding documentary evidence, not limit to:
1)copies of sales contract/PO (only front page, signed page, supply scope);
2)General layout drawing;(Provide Buoyancy Element General layout drawing to prove it is Integrated Buoyancy Element. The other production can be not provided General layout drawing );
3) product classification certificate;
4)in-service documents.

The document to show the in-service time can be one of:
1)reference letter from Client/ End user to verify in-service time;
2) public press information to show the time of facility first oil or mooring hook up from offshore petroleum development technology research organization(OTC paper, OFFSHORE MAGZINE poster,and related official website );
3) Official website of Client/ End user to verify in-service time.
The floating production facility type shall be highlighted in documents.

3. All those who are willing to participate in the bids arekindly requested to: enter into website https://buy.cnooc.com.cn/cbjyweb/to purchase the biddingdocuments (electronic edition) on line from September 30, 2022 to October 12, 2022 upon non-refundable payment of RMB 2,000 or USD300 for each copy. (Beneficiary:CNCCC International Tendering Co., Ltd., Name of Bank: INDUSTRIAL AND COMMERCIAL BANK OF CHINA,Beijing National Cultural and Financial Cooperation Demonstration Zone Jinjie Sub-branch; USD A/C No.: 0200000709117000351, SWIFT Code: ICBKCNBJBJM，Bank address:No. 237 Wang fu jing Street, Dongcheng District, Beijing, ChinaPR: 100006.).After completion of the remittance, the bidder could download the bidding documents. Those who didn’t purchase the bidding documents are not allowed to participate in the bids.

4. Bids must be delivered to No.8 Meetingroom 4th. Floor, CNOOC Tower,No.6 Dongzhimenwai Xiaojie, Dongcheng District, Beijing 100027, P.R. China forsubmission of bids before 9:00 a.m. (Beijing time) onOctober 24,2022.

5.Bids will be opened in the presence of bidders'representatives who choose to attend at 9:00 a.m. (Beijing time) on October 24,2022 atNo.8 Meetingroom 4th. Floor, CNOOC Tower, No.6 Dongzhimenwai Xiaojie, Dongcheng District, Beijing 100027, P.R. China forbid-opening.

6.The Invitation for Bids is issued on the website of www.chinabidding.com simultaneously.

7.The bidder needs to register before the tender on www.chinabidding.com. And the evaluation results will be released on www.chinabidding.com.

Name of Purchaser: CNOOC China Limited
Address:Floor32, CNOOC Tower A (Shenzhen), No. 3168, Shenzhen Bay Section, HouhaibinRoad,Nanshan District, Shenzhen 518000, Guangdong Province, P.R. China, 518000
Contact Person: Zuo Yuanyuan
Telephone: +86-755-26022447
E-mail: zuoyy@cnooc.com.cn

Name of Tendering Agent: CNCCC International Tendering Co., Ltd.
Detailed Address: Floor 4, CNOOC Tower, No.6 DongzhimenwaiXiaojie, Dongcheng District, Beijing 100027, P.R. China
Post Code: 100027
Contactperson:Chen Sicong
Telephone:+86-10-84525975
E-mail:chensc2@cnooc.com.cn