| 招标信息 | |||
|---|---|---|---|
| ？？招标单位 | 铝材公司 | 项目名称 | 橡胶带、传送带、毛毡带、三角带 |
| ？？招标联系人 | 无 | 手机 | 无 |
| ？？联系电话 | 无 | 联系邮件 | zhaobiao@nanshan.com.cn |
| ？？质保期 | 报名截止日期 | ||
| ？？招标邮箱 | zhaobiao@nanshan.com.cn | ||
| 竞标保证金信息 | |||
|---|---|---|---|
| ？？项目保证金 | 2000.00元 | 帐户名称 | 山东新南铝材科技开发有限公司 |
| ？？帐号 | 233832812142 | 开户行 | 中国银行龙口南山支行 |
| ？？备注 | |||
| 备注：竞价保证金汇款只接受公司转账，不支持个人名义转账或银行柜台现金转账。 | |||
| 供应审计部招标联系人信息 | |||
|---|---|---|---|
| ？？标书联系人 | 无 | 办公电话 | 无 |
| ？？邮件 | 无 | ||
| 标书汇款相关信息 | |||
|---|---|---|---|
| ？？账户名称 | 无 | 账号 | 无 |
| ？？开户行 | 无 | 行号 | 无 |
| ？？标书收费标准 | 地址、电话 | 无 | |
| 备注：标书费汇款只接受公司转账，不支持个人名义转账或银行柜台现金转账。注明标书费的用途或投标项目名称。 | |||
| 物品名称 | 规格型号 | 数量 | 单位 | 描述 |
|---|---|---|---|---|
| 三角带 | A864 | 6.00 | 根 | {"规格":"A864","带类型":"V型","材质":"天然橡胶+包布织物（氯丁二烯棉、聚酯纤维织物）+聚酯线绳","参照标准":"GB/T 1171-2017"} |
| 三角带 | B3200 | 56.00 | 条 | {"规格":"B3200","带类型":"B","材质":"由胶帆布、顶胶、缓冲胶、芯绳、底胶组成","宽度":"顶宽17mm","厚度":"11mm","特殊要求":"顶宽17mm；高度11mm；楔角40°；基准长度极限偏差+44mm、-22mm；中心距变化量≤2.0mm；拉伸强度≥5.0KN；外观质量：型号标示清晰，手握住三角带松开时手感不粘无龟裂现象。","使用寿命":"≥4个月","参照标准":"GB/T4489-2002、GB/T1171-2006、GB/T11544-2012"} |
| 三角带 | B1956 | 20.00 | 条 | {"规格":"B1956","带类型":"B","材质":"橡胶NR、包布、芯绳"} |
| 三角带 | Z1050 | 6.00 | 条 | {"规格":"Z1050","带类型":"Z型","材质":"伸张层、缓冲层、压缩层材质：氯丁橡胶；包布层：氯丁二烯棉、聚酯纤维织物；强力层：聚酯线绳","宽度":"10mm","厚度":"6mm","节线长度":"1050mm","特殊要求":"若不符合技术要求或质量问题，则退换货，产生的所有费用由供货商承担。","使用寿命":"120天","参照标准":"GB/T 1171-2017","备注":"根据公司要求完善该物资技术要求。"} |
| 三角带 | C114 | 20.00 | 条 | {"规格":"C114","带类型":"C","材质":"氯丁橡胶+聚酯纤维织物","宽度":"22mm","厚度":"14mm","节线长度":"2896mm","特殊要求":"到货质量与技术要求不符,做退换货处理","使用寿命":"365天","参照标准":"GB/T 12730-2018","备注":"最少轮径120mm"} |
| 三角带 | 宽度":"17mm","厚度":"11m | 20.00 | 条 | {"宽度":"17mm","厚度":"11mm","材质":"天然橡胶\\包布织物\\聚酯线绳","特殊要求":"B1499,不得有胶布破损\\鼓泡\\带身压扁","参照标准":"GB/T 11544-2012"} |
| 三角带 | 4095 | 50.00 | 根 | {"规格":"4095","带类型":"SPC","材质":"橡胶、帆布、芯绳","参照标准":"GB/T1171-2017"} |
| 三角带 | A1200 | 30.00 | 条 | {"规格":"A1200","带类型":"A","材质":"伸张层、缓冲层、压缩层材质：氯丁橡胶；包布层：氯丁二烯棉、聚酯纤维织物；强力层：聚酯线绳；","使用寿命":"≥3个月","参照标准":"GB/T11544-2012"} |
| 三角带 | 8V3556 | 100.00 | 条 | {"规格":"8V3556","带类型":"V型","材质":"伸张层,压缩层:氯丁橡胶,包布层:聚酯纤维,强力层:聚酯线绳","宽度":"25mm","厚度":"23mm","使用寿命":">90天"} |
| 压片机PU带 | 5370*1000*1.4 | 15.00 | 条 | {"规格型号":"5370*1000*1.4","材质":"PU","宽度":"1000mm","厚度":"1.4mm","长度":"周5370mm","拉伸度":"2mm","工作温度":"40℃","阻燃":"是","内衬材料":"聚酯纤维布","层数":"4层","导向条尺寸":"底宽12mm*高8mm*上宽6mm","传动辊直径":"130mm","特殊要求":"抗拉强度高，打弯性能好耐磨损，材质耐温-20/+ 80度 .使用寿命不低于180天.","参照标准":"QB/T 5351-2018","备注":"PU带左右两边都有导向条，导向条底边与PU带边沿距离为10mm，PU带周长5370mm，宽1000mm，PU带无缝接驳部位为齿形交叉硫化热接，如与技术要求不符，则退换货处理，产生的费用由供货商承担。"} |
| 同步带 | HTD2720-8M-30mm | 20.00 | 条 | {"规格":"HTD2720-8M-30mm","带类型":"环形无接缝齿形带","材质":"氯丁橡胶带身,玻璃纤维涨紧层，齿面尼龙布","宽度":"30±2%mm","厚度":"6±2%mm","节线长度":"2720±2%mm","特殊要求":"齿形HTD/节距8mm/齿高3.4mm","使用寿命":"≥180天","参照标准":"GB/T 13487-2017","备注":"到货验收标准:1.包装完好,内部备件无破碎,损坏.2.型号,参数,等必须符合技术要求，附带产品合格证.3.升级型号的或替代型号的备件应带有升级或替代证明.4.若不符合技术要求或出现质量问题,则退换货,产生的费用由供货方承担."} |
| 传送带 | 4330*250*3 | 2.00 | 条 | {"规格型号":"4330*250*3","材质":"pvc或聚氯乙烯+聚酯织物","宽度":"250mm","厚度":"3mm","长度":"4330mm","拉伸度":"0.3~0.5mm","工作温度":"-20~80℃","阻燃":"是","内衬材料":"聚酯织物","层数":"2层","导向条尺寸":"无","传动辊直径":"89mm","特殊要求":"产品结构为二布二胶无缝接驳,使用寿命大于一年，传送带颜色为深绿色","参照标准":"GB/T 7984-2013","备注":"要求：表面防滑具有良好的抗压耐磨性。一体成型无缝接驳。到货产品必须附带出厂材质证明，产品合格证，检测报告以便于进行到货验收的依据。到货产品与技术要求不符或存在缺陷，供货商无条件给予更换或退货，退换货产生的一切费用由供货商自行承担。"} |
| 垂直提升机传送带 | 10850*150*10 | 1.00 | 条 | {"规格型号":"10850*150*10","材质":"PVC","宽度":"150mm","厚度":"10mm","长度":"10850mm","拉伸度":"2mm","工作温度":"-10~80℃","阻燃":"是","内衬材料":"聚酯帆布","层数":"10层","导向条尺寸":"无","传动辊直径":"300mm","特殊要求":"环形无接头","参照标准":"GB/T 7984-2013","备注":"5布5胶绿色传送带，厚度偏差±1mm、硬度73-88（shorea）。表面验修要求：表面无气泡，起皮，无毛刺起层现象，带体耐冲击、抗撕裂、抗磨耗。到货必需带出厂证明和产品合格证。到货产品于技术要求不符，厂家必需无条件退换货。使用寿命大于等于1年。"} |
| 传送带 | 32650*80*3 | 5.00 | 条 | {"规格型号":"32650*80*3","材质":"耐磨橡胶尼龙片基","宽度":"80mm","厚度":"3mm","长度":"32650mm","内衬材料":"尼龙片基"} |
| 传送带 | 30600*80*3 | 5.00 | 条 | {"规格型号":"30600*80*3","材质":"耐磨橡胶尼龙片基","宽度":"80mm","厚度":"3mm","长度":"30600mm","内衬材料":"尼龙片基"} |
| 传输带 | 14M*6764*115/600℃ | 30.00 | 条 | {"规格":"14M*6764*115/600℃","带类型":"重型级高温毛毡传输带","材质":"1PU + 面层PBO高温毛毡（4+6/600度），底带TPV","宽度":"113----115mm","厚度":"10±1mm","节线长度":"6764mm","特殊要求":"带有软细钢丝","使用寿命":"60天","参照标准":"GB/T 13487-2017","备注":"齿距：14mm\n齿高度：6mm\n齿型：HTD 圆弧齿\n毛毡耐热温度：600℃"} |
| 高温同步带 | 高温500度，米色 | 10.00 | 个 | {"型号及色号":"高温500度，米色","宽度":"80mm","厚度":"10mm","材质":"杜邦纤维针刺，高温树脂","参照标准":"FZ/T 25001-1992"} |
| 多楔带 | PL2325-16 | 5.00 | 条 | {"规格":"PL2325-16","带类型":"PL","楔数":"16","楔距":"4.7","使用寿命":"90天","参照标准":"GB/T 3686-2014","备注":"材质：橡胶，抗拉体材料为高强度聚酯绳线,楔角40°,无裂纹，无开胶，高强度，外观要完整，适用设备20MN中间锯，到货附带合格证，如到货与技术要求不符,无条件做退换货处理,由此产生的一切费用由供方承担"} |
| 带齿耐高温同步带 | 10*2292*49 | 15.00 | 条 | {"型号及色号":"10*2292*49","宽度":"49mm","厚度":"10mm","材质":"杜邦纤维针刺,高温树脂","参照标准":"GB/T 13487-2017","备注":"齿形:梯形齿,参数尺寸:带宽:49mm;带长:2292mm;带厚:10mm;齿节距:12mm;齿顶厚:4mm;齿根厚:5mm;齿高:3mm;纤维层厚:7mm.耐热温度:500℃.使用场合:挤压铝合金使用的耐高温同步带.使用寿命:正常情况下使用3个月以上.验收要求:如所送的物品规格尺寸,材质达不到以上技术要求,生产厂家必须无条件退货,并再次送货,合格为止."} |
| 同步带贴中温毛毡 | 14M-10250-65 | 8.00 | 条 | {"规格":"14M-10250-65","带类型":"齿形带","材质":"凯夫拉+PU同步带","厚度":"10mm","特殊要求":"PU同步带与毛毡热熔一体粘合","使用寿命":"≥180天"} |
| 多契带 | 16-1915 | 2.00 | 条 | {"规格":"16-1915","带类型":"多契带","材质":"伸张层压缩层:氯丁橡胶,包布层:聚酯纤维","宽度":"75mm","厚度":"7mm","节线长度":"1915mm","特殊要求":"齿数16","使用寿命":"365天","参照标准":"GB/T 13487-2017"} |
| 高温同步带 | 2614*80*10 | 60.00 | 条 | {"型号及色号":"2614*80*10","宽度":"80mm","厚度":"10mm","材质":"杜邦纤维针刺，高温树脂等","参照标准":"无"} |
| 齿形带 | HTD 1160-M5 | 10.00 | 条 | {"规格":"HTD 1160-M5","带类型":"齿型","材质":"氯丁橡胶内含聚酯线芯，齿面用尼龙高弹力布保护","宽度":"26±1mmmm","厚度":"4±0.5mmmm","节线长度":"1160±1mmmm","特殊要求":"齿距5毫米，齿高：2.05±0.05mm","使用寿命":"(该备件为易损件,根据现场使用情况)≥60天天","参照标准":"GB/T 13487-2017","备注":"货验收:到货皮带表皮无破损、刮丝等情况,表面无橡胶老化的问题,到货提供相关合格证明,相关尺寸参数必须满足技术要求,若不符合要求,厂家予以退换货处理,产生费用由供货商承担."} |
| 齿形带 | HTD 550-5M | 30.00 | 条 | {"规格":"HTD 550-5M","带类型":"齿型","材质":"氯丁橡胶内含聚酯线芯，齿面用尼龙高弹力布保护","宽度":"26±1mmmm","厚度":"4±0.5mmmm","节线长度":"550±1mmmm","特殊要求":"齿距5毫米，齿高：2.05±0.05mm","使用寿命":"(该备件为易损件,根据现场使用情况)≥60天天","参照标准":"GB/T 13487-2017","备注":"货验收:到货皮带表皮无破损、刮丝等情况,表面无橡胶老化的问题,到货提供相关合格证明,相关尺寸参数必须满足技术要求,若不符合要求,厂家予以退换货处理,产生费用由供货商承担."} |
| 环形草坪纹工业皮带 | 4*200*5030 | 5.00 | 条 | {"规格型号":"4*200*5030","材质":"PVC","宽度":"200mm","厚度":"4mm","长度":"5030mm","拉伸度":"0mm","工作温度":"30℃","阻燃":"阻燃","内衬材料":"聚酯织物","层数":"4层","导向条尺寸":"0","传动辊直径":"0","特殊要求":"无","参照标准":"GB/T 32331-2015","备注":"用于光伏自动线材料传输，细纹路，厚度加凸点尺寸不超5mm，两胶两布，防滑、抗磨、耐油、耐低温。草坪纹绿色。到货产品如与技术要求不符实行退换货处理，由此产生的费用由厂家承担。"} |
| 圆弧齿同步带 | S14M1778-80 | 10.00 | 条 | {"规格":"S14M1778-80","带类型":"圆弧齿","材质":"氯丁橡胶（橡胶内含钢丝）","宽度":"80±0.1mmmm","厚度":"10.2±0.5mmmm","节线长度":"1778±2mmmm","特殊要求":"齿距14mm","使用寿命":"(该备件为易损件,根据现场使用情况)≥60天天","参照标准":"GB/T 13487-2017","备注":"货验收:到货皮带表皮无破损、刮丝等情况,表面无橡胶老化的问题,到货提供相关合格证明,相关尺寸参数必须满足技术要求,若不符合要求,厂家予以退换货处理,产生费用由供货商承担."} |
| 同步带 | AT10 6550*80*10 | 8.00 | 条 | {"规格":"AT10 6550*80*10","带类型":"AT型齿","材质":"内层：氯丁橡胶+聚酯线绳，外层：氟橡胶（一次成型）","宽度":"80±1mmmm","厚度":"10±0.5mmmm","节线长度":"6550±5mmmm","特殊要求":"齿距10毫米，齿高：2.5±0.05mm","使用寿命":"(该备件为易损件,根据现场使用情况)≥180天天","参照标准":"GB/T 37203-2018","备注":"齿底有耐磨尼龙帆布绳芯，内层：氯丁橡胶+聚酯线绳5mm±0.2mm，外层：氟橡胶5mm±0.3mm带中导条10*6mm±0.2，工作温度：≥280℃，货验收:到货皮带无破损情况,表面无橡胶老化的问题,到货提供相关合格证明,相关尺寸参数必须满足技术要求,若不符合要求,厂家予以退换货处理,产生费用由供货商承担."} |
| 同步带 | AT10 1180*80*10 | 12.00 | 条 | {"规格":"AT10 1180*80*10","带类型":"AT型齿","材质":"内层：氯丁橡胶+聚酯线绳，外层：氟橡胶（一次成型）","宽度":"80±1mmmm","厚度":"10±0.5mmmm","节线长度":"1180±5mmmm","特殊要求":"齿距10毫米，齿高：2.5±0.05mm","使用寿命":"(该备件为易损件,根据现场使用情况)≥180天天","参照标准":"GB/T 37203-2018","备注":"齿底有耐磨尼龙帆布绳芯，内层：氯丁橡胶+聚酯线绳5mm±0.2mm，外层：氟橡胶5mm±0.3mm带中导条10*6mm±0.2，工作温度：≥280℃，货验收:到货皮带无破损情况,表面无橡胶老化的问题,到货提供相关合格证明,相关尺寸参数必须满足技术要求,若不符合要求,厂家予以退换货处理,产生费用由供货商承担."} |
| 同步带 | AT10 5200*80*10 | 12.00 | 条 | {"规格":"AT10 5200*80*10","带类型":"AT型齿","材质":"内层：氯丁橡胶+聚酯线绳，外层：氟橡胶（一次成型）","宽度":"80±1mmmm","厚度":"10±0.5mmmm","节线长度":"5200±5mmmm","特殊要求":"齿距10毫米，齿高：2.5±0.05mm","使用寿命":"(该备件为易损件,根据现场使用情况)≥180天天","参照标准":"GB/T 37203-2018","备注":"齿底有耐磨尼龙帆布绳芯，内层：氯丁橡胶+聚酯线绳5mm±0.2mm，外层：氟橡胶5mm±0.3mm带中导条10*6mm±0.2，工作温度：≥280℃，货验收:到货皮带无破损情况,表面无橡胶老化的问题,到货提供相关合格证明,相关尺寸参数必须满足技术要求,若不符合要求,厂家予以退换货处理,产生费用由供货商承担."} |
| 垂直提升机传送带 | 12700*200*10 | 2.00 | 条 | {"规格型号":"12700*200*10","材质":"PVC","宽度":"200mm","厚度":"10mm","长度":"12700mm","拉伸度":"2mm","工作温度":"-10-90℃","阻燃":"是","内衬材料":"聚酯帆布","层数":"10层","导向条尺寸":"无","传动辊直径":"300mm","特殊要求":"环形无接头","参照标准":"GB/T 7984-2013","备注":"5布5胶绿色传送带，厚度偏差±1mm、长度偏差±5mm，硬度73-88（shorea）。表面验修要求：表面无气泡，起皮，无毛刺起层现象，带体耐冲击、抗撕裂、抗磨耗。到货必需带出厂证明和产品合格证。到货产品于技术要求不符，厂家必需无条件退换货，产生的费用有供应商承担。使用寿命≥1年。"} |
| 圆弧齿中温毛毡同步带 | 1220*60*9.5白色 | 12.00 | 条 | {"型号及色号":"1220*60*9.5白色","宽度":"60mm","厚度":"带厚9.5；中心导向齿厚2.3；总厚度11.8mm","材质":"聚氨酯+中温毛毡","参照标准":"GB/T 13487-2017","备注":"要求：同步带环形长度为1220mm。一体成型无缝接驳，使用寿命大于一年。到货产品必须附带出厂材质证明，产品合格证，检测报告以便于进行到货验收的依据。到货产品与技术要求不符或存在缺陷，供货商无条件给予更换或退货。退换货所产生的费用由供货商承担。"} |
| 高温毛毡筒 | 100*10*1100/600℃ | 20.00 | 个 | {"型号及色号":"100*10*1100/600℃","宽度":"100mm","厚度":"10mm","材质":"毛毡","参照标准":"FZ/T 25001-2012","备注":"使用寿命：1年；如出现于技术要求不符状况，供应商无条件退货或更换，费用由供应商负担。"} |
| 同步带 | 540L-075 | 20.00 | 条 | {"规格":"540L-075","带类型":"环型无接缝同步带","材质":"氯丁橡胶+绳芯","宽度":"19.10mm","厚度":"3.5mm","节线长度":"1371.60mm","特殊要求":"尺寸误差允许±0.5mm，节距：9.525mm，齿数：144齿，1、如配件到货质量与技术要求不符，退换货产生的费用由供货方承担。 2、因配件质量原因造成公司经济损失的按照供应公司相关规定进行处罚。","使用寿命":"180天","参照标准":"GB/T 11616-2013"} |
| 投标厂商资质 | |||
| 注册资金 | 专业资质 | ||
| 公司业绩 | |||
| 相关认证 | |||
| 其他 | |||
