招标
各分厂天车备件一批（长协）
金额
-
项目地址
-
发布时间
2022/11/30
公告摘要
项目编号-
预算金额-
招标公司-
招标联系人-
标书截止时间-
投标截止时间-
公告正文
I、Project overview
Item number：XJCG22112912019936
Project name：各分厂天车备件一批（长协）
project type：Directional procurement
Issued by：Delong steel
Released by：Supply dept.
II、Bidder must log inthe cloud procurement bidding platform Be sure to complete the registration and obtain bidding qualification before the bid opening to conduct bidding and bid opening activities. The bid winning situation will be announced on this website.
III、Online bidding method: For specific steps, please refer to the "Service Guide" on the homepage of the website.
IV、quotation deadline：2022-12-11 00:00:00，Bidders shall successfully submit all electronic bidding documents on the cloud procurement bidding platform before the bid deadline, and overdue will not be accepted.
V、attachment information
VI、Clarification attachment
、Target information
详情请访问原网页！
Item number：XJCG22112912019936
Project name：各分厂天车备件一批（长协）
project type：Directional procurement
Issued by：Delong steel
Released by：Supply dept.
II、Bidder must log inthe cloud procurement bidding platform Be sure to complete the registration and obtain bidding qualification before the bid opening to conduct bidding and bid opening activities. The bid winning situation will be announced on this website.
III、Online bidding method: For specific steps, please refer to the "Service Guide" on the homepage of the website.
IV、quotation deadline：2022-12-11 00:00:00，Bidders shall successfully submit all electronic bidding documents on the cloud procurement bidding platform before the bid deadline, and overdue will not be accepted.
V、attachment information
| Title | Relevant documents |
|---|
VI、Clarification attachment
| Title | Relevant documents |
|---|
、Target information
| material code | material name | specification and model | Unit of measurement | purchase quantity | used by | Requirement note |
|---|---|---|---|---|---|---|
| 10.281.102.0030 | 制动器 | 制动力矩:力矩280Nm 瓦块退距≤0.8mm;型号:YWZE200-30 WC.WL.HL; | 台 | 1 | ???天车车间??? | |
| 10.281.102.0061 | 制动器 | 制动力矩:制动力矩2000N 瓦块退距≤1.25mm;型号:YWZE-400/125 WC.WL HR; | 台 | 2 | ???天车车间??? | |
| 10.281.107.0108 | 主动车轮组 | 额定重量:20t/25t行车大车使用;规格尺寸:700*160;型号:Φ700*160 双缘 适配50KG轨;备注:含角箱，车轮（碾钢），轴(40Cr)，轴承(哈、瓦、洛)等组装来货;图号:现场实测; | 套 | 2 | ???天车钳工班??? | |
| 10.281.108.0081 | 被动车轮组 | 额定重量:20t/25t行车大车使用;规格尺寸:700*160;图号:含角箱，车轮（碾钢），轴(40Cr)，轴承(哈、瓦、洛)等组装来货 需实测;;型号:Φ700*160 双缘 适配50KG轨; | 套 | 2 | ???天车钳工班??? | |
| 10.281.102.0108 | 制动器 | 制动力矩:力矩280Nm 瓦块退距≤0.8mm;型号:YWZE200-30 .HR; | 台 | 3 | ???天车钳工班??? | |
| 10.281.102.0109 | 制动器 | 制动力矩:力矩280Nm 瓦块退距≤0.8mm;型号:YWZE200-30 .HL; | 台 | 3 | ???天车钳工班??? | |
| 10.281.105.0115 | 加料跨铸造机副钩定滑轮组 | 额定重量:改140/32付钩定滑轮用;材质:轧制;型号:Φ570 适配22绳 滑轮绳槽缘加厚不低于11mm 各片均装配哈、瓦、洛品牌6226轴承，轴为40Cr，锻件，各片可配单独润滑;直径mm:Φ570; | 套 | 1 | ???天车钳工班??? | |
| 10.281.105.0116 | 上钢跨铸造机副钩定滑轮组 | 额定重量:改160/40付钩定滑轮用;材质:轧制;型号:Φ785 适配24绳 滑轮绳槽缘加厚不低于11mm 各片均装配哈、瓦、洛品牌6226轴承，轴为40Cr，锻件，各片可配单独润滑;直径mm:Φ785; | 套 | 1 | ???天车钳工班??? | |
| 10.281.143.0001 | 50+32T车主钩卷筒支座 | 新1#、2#车主钩使用，适配卷筒型号:D*L:800*2680配用Φ28钢丝绳，起升高度24米图号：XL4097.31.31.08.00，实测 | 个 | 1 | ???天车钳工班??? | |
| 10.281.107.0032 | 主动车轮组 | 额定重量:160t铸造吊副小车使用;规格尺寸:Φ500*140双缘;型号:双缘 配用50Kg/m道轨;备注:车轮、轴、轴承座+轴承+轴承盖+密封;图号:要求使用轴承为哈、瓦、洛产品；轮片为碾钢 需实测; | 套 | 1 | ???天车钳工班??? | 要求使用轴承为哈、瓦、洛产品；轮片为碾钢（需实测） |
| 10.281.106.0022 | 铸造吊自动挂钩的T型小钩（改进型） | 额定重量:40t;型号:结合现场绘图改制，小钩弯面带可更换耐磨套; | 个 | 1 | ???天车钳工班??? | 现场实测，要求到货带图纸 |
| 10.021.005.0786 | 半联轴器 | 所属设备型号:新0#车主小车行走低速轴联轴器;型号:Φ350 YA145*185;加工件图号:实测;键：36; | 个 | 1 | ???天车钳工班??? | |
| 10.021.005.1040 | 轴接手 | 所属设备型号:新0#铸造吊大车主动轮轴装配使用;型号:Φ315 YA120*185，与万向轴联轴器SWF315F-1ⅹ1000相连;加工件图号:需现场实际测绘; | 个 | 1 | ???天车钳工班??? | |
| 10.281.131.0004 | 160T天车主小车拖缆滑车轮 | 图号:配CH-3型拖缆滑车用; | 个 | 50 | ???天车钳工班??? | 满足与现用件互换 |
| 10.281.004.0062 | 电葫芦 | 额定起重量:10t;运行速度m/min:无;起升速度m/min:无;有效起升高度:30m;型号:CD1;备注:包含成套小车行走装置电机、减速机；、吊钩组、挂板、带操作箱、操作器等组装好成套来货; | 套 | 2 | ???天车车间??? |
详情请访问原网页！
解决方案
联系我们
返回顶部